Alaabta PCB-yada Dabacsan ee Hal-dhinac ah Bixiyaha Shiinaha PCB Prototype

Iibiyaha PCB-yada dabacsan ee Hal-dhinac ah ee Shiinaha PCB Prototype Sawirka leh

Sharaxaad Gaaban:

Qaabka: PCB dabacsan oo hal dhinac ah

Codsiga alaabta: xakamaynta warshadaha

Lakabyada looxa: 1 lakab

Waxyaabaha salka: Polyimide (PI)

Dhumucda gudaha Cu:/

Quter Cu dhumucdiisuna: 18um

Daboolka midabka filimka: Jaalle

Maaskarada alxanka:/

Shaashadda xariirta: Caddaan

Daaweynta dusha sare: ENIG

Dhumucda FPC: 0.1 +/- 0.03mm

Nooca adag: SUS

Daloollada min: 0.3mm

Dalool indho la'aan:/

God la aasay:/

Balaadhka khadka ugu yar: 0.1/0.1mm

Dulqaadka (nm): PTH: 土0.076, NTPH: 0.05

Caqabad:/

Email noogu soo dir

Faahfaahinta Alaabta

Tags Product

Tilmaamid

Qaybta	Kartida Habka	Qaybta	Kartida Habka
Nooca Wax-soo-saarka	Hal lakab oo FPC / Laba lakab FPC Lakab badan oo FPC / Aluminium PCBs PCB-yada adag-Flex	Lambarka lakabyada	1-16 lakab FPC 2-16 lakab oo adag-FlexPCB HDI Printed Circuit Boards
Inta ugu badan ee wax soo saarka	Hal lakab oo FPC ah 4000mm Lakabyada Doulbe FPC 1200mm lakabyo badan oo FPC 750mm PCB adag-Flex 750mm	Lakabka dahaadhka ah Dhumucda	27.5um / 37.5/ 50um / 65/ 75um / 100um / 125um / 150um
Dhumucda looxa	FPC 0.06mm - 0.4mm PCB adag-Flex 0.25 - 6.0mm	Dulqaadka PTH Cabbirka	± 0.075mm
Dhamaystir dusha sare	Dahabka Immersion/Immersion Silver/Gold Plating/Tin Plat ing/OSP	Adag	FR4 / PI / PET / SUS / PSA/Alu
Cabbirka Orifice Semi-wareega	Ugu yaraan 0.4mm	Meesha khadka ugu yar/ballaca	0.045mm/0.045mm
Dulqaadashada Dhumucda	±0.03mm	Caqabada	50Ω-120Ω
Dhumucda Foolka Naxaasta	9um/12um/18um/35um/70um/100um	Caqabada La xakameeyey Dulqaad	± 10%
Dulqaadka NPTH Cabbirka	±0.05mm	Balaadhka Dheecaanka Min	0.80mm
Min Via Hole	0.1mm	Fulin Heerka	GB / IPC-650 / IPC-6012 / IPC-6013II / IPC-6013III

Waxaan samaynaa PCB Prototype oo khibrad 15 sano ah u leh xirfadeena

3 lakab Flex PCBs

4 PCB-yada adag-Flex

8 lakab HDI Printed Wareegtada

Qalabka Imtixaanka iyo Kormeerka

Tijaabada Microscope

Kormeerka AOI

Tijaabada 2D

Tijaabada Impedance

Tijaabada RoHS

Baadhitaanka Duulaya

Tijaabada Horizontal

Laacidda Teste

Adeegeena Prototype PCB

.Bixi taageero farsamo ka hor iibka iyo iibinta ka dib;
.Caadiyan ilaa 40 lakab, 1-2maalmood si degdeg ah u rogi kara wax-soo-saar la isku halayn karo, wax-soo-saar ballaaran, Soo iibinta qaybaha, Golaha SMT;
.U adeegta labada Aaladaha Caafimaadka, Xakamaynta Warshadaha, Baabuurta, Duulista, Elektarooniga Macmiilka, IOT, UAV, Isgaadhsiinta iwm.
.Kooxahayada injineerada iyo cilmi-baarayaasha waxay u heellan yihiin inay buuxiyaan shuruudahaaga si sax ah oo xirfad leh.

Waa maxay faraqa farsamo ee u dhexeeya PCB-da dabacsan ee hal dhinac ah iyo guddiyada wareegyada dabacsan ee laba-dhinac ah?

PCB-yada dabacsan ee hal dhinac ah ayaa leh lakabka wax-qabadka ee dhinac ka mid ah walxaha substrate-ka.Qaybaha waxaa badanaa lagu dhejiyaa dhinacan, halka dhinaca kale uu yahay mid aan shaqaynayn.Raad-raacyada wax-ku-oolka ah ayaa inta badan laga sameeyaa naxaas waxaana lagu samayn karaa iyadoo la isticmaalayo farsamooyin kala duwan oo wax-abuuris ah sida etching.

Looxyada wareegyada dabacsan ee laba-dhinac leh, dhanka kale, waxay leeyihiin lakabyo wax-qabad ah oo ku yaal labada dhinac ee substrate-ka.
Tani waxay u oggolaaneysaa qaybaha in lagu dhejiyo labada dhinac, kordhinta cufnaanta guud ee qaybta iyo shaqeynta guddiga.Raad-raacyada wax-qabadka ah ayaa la isku xidhi karaa iyadoo la isticmaalayo godadka (PTHs) ama fiisooyin, taasoo u oggolaanaysa isku xirka koronto ee u dhexeeya lakabyada sare iyo hoose.

Farqiga kale ee muhiimka ah ayaa ah in PCB-ga dabacsan ee hal dhinac ah uu guud ahaan ka kharash badan yahay oo uu ka fudud yahay soo saarista marka loo eego laba-dhinac.Sababo la xiriira lakabka dhaqdhaqaajinta dheeraadka ah iyo isticmaalka suurtogalka ah ee PTH ama vias, dabacsanaanta laba-geesoodka ah ayaa badanaa ka adag, waxay u baahan tahay hab wax-soo-saar horumarsan, oo sidaas darteed xoogaa qaali ah.

Maxaad ugu baahan tahay Prototype PCB-ga degdega ah?

1. Wax-soo-saarka yar-yar ee kharash-ku-oolka ah: Prototype PCB-ga degdega ah wuxuu u oggolaanayaa socodsiinta wax-soo-saarka mugga hooseeya, kaas oo noqon kara kharash-wax-ku-ool ah soo-saarka badeecadaha hore, suuqyada niche, ama shuruudaha wax-soo-saarka xaddidan.
Waxay meesha ka saaraysaa baahida loo qabo maal-gashi ballaaran oo xagga hore ah oo lagu sameeyo qalabka wax-soo-saarka ballaaran, qalabaynta, iyo agabka.

2. Iskaashi iyo jawaab celin: Nooca PCB ee degdega ah wuxuu u sahlayaa injineerada inay la shaqeeyaan daneeyayaasha, oo ay ku jiraan macaamiisha, kooxaha naqshadaynta, iyo soosaarayaasha, si wax ku ool ah.Iyaga oo gacanta ku haysta tusaalayaal jireed, waxay soo ururin karaan jawaab celin qiimo leh iyo fikrado dhinacyo kala duwan leh, taasoo horseedaysa hagaajinta naqshadaynta iyo natiijooyinka ugu dambeeya ee alaabta.

3. Wakhtiga la dhimay suuqa: Iyada oo la adeegsanayo prototype PCB-ga degdega ah, injineeradu waxay si weyn u yareeyn karaan wareegga horumarinta badeecada, iyaga oo gaabinaya wakhtiga ay ku qaadanayso in badeecad la keeno suuqa.Tani waxay awood u siinaysaa ganacsiyada inay ka faa'iidaystaan fursadaha suuqa, ka hor tartamayaasha, oo ay dakhli u soo saaraan si degdeg ah.

4. Dabacsanaanta isbeddelka naqshadeynta: PCB Prototype wuxuu bixiyaa dabacsanaan lagu daro isbeddelada naqshadeynta iyo hagaajinta inta lagu jiro habka horumarinta.Injineerada ayaa si dhakhso ah wax uga beddeli kara oo dib ugu celin kara naqshadda PCB, samaynta hagaajinta ku saleysan natiijooyinka tijaabada, jawaab celinta macaamiisha, ama caqabadaha wax soo saarka.Firfircoonidani waxay gacan ka geysataa hagaajinta naqshadaynta alaabta ugu dambeysa, kor u qaadida waxqabadkeeda iyo shaqeynteeda.

5. Xidhiidh la wanaajiyey oo lala yeesho soosaarayaasha: Nooca PCB-ga degdega ah waxa ku jira wada shaqayn dhow oo lala yeesho soo saarayaasha PCB, kobcinta xidhiidh wanaagsan iyo wada shaqayn ka dhaxaysa kooxaha naqshadaynta iyo alaab-qeybiyeyaasha.Iskaashigan dhow ayaa sahlaya naqshadaynta wax-soo-saarka (DFM), halkaas oo injineerada ay kor u qaadi karaan nashqada si loo hubiyo wax soo saarka siman oo looga fogaado arrimaha wax soo saarka ama dib u dhaca.

6. Barashada iyo horumarinta xirfada: PCB Prototype waxa uu u ogolaadaa injineerada in ay kasbadaan khibrad gacmeed oo qiimo leh oo ku saabsan isku imaatinka PCB iyo hababka wax soo saarka.Waxay ka caawisaa inay fahmaan kakanaanta iyo nuucyada wax soo saarka PCB, taasoo u horseedaysa hagaajinta go'aamada naqshadaynta, dhaqamada DFM ee wanaagsan, iyo kor u qaadista xirfadaha injineernimada guud.

Hore: 4 Lakab dabacsan PCBs PI Multilayer FPCs loogu talagalay kuwa hadlaya

Xiga: PCB-yada Dabacsan ee Hal-Lakab ah oo Dabacsan oo Dabacsan

Halkan ku qor fariintaada oo noo soo dir