Hal-dhinac Fr4 PCB soo saaraha Rogers PCB
Kartida Habka PCB
| Maya | Mashruuca | Tilmaamayaasha farsamada |
| 1 | Lakabka | 1 - 60 (lakab) |
| 2 | Meesha ugu sarraysa | 545 x 622 mm |
| 3 | Dhumucnaanta ugu yar | 4 (lakab) 0.40mm |
| 6 (lakab) 0.60mm | ||
| 8 (lakab) 0.8mm | ||
| 10 (lakab) 1.0mm | ||
| 4 | Balaadhka khadka ugu yar | 0.0762mm |
| 5 | Kala dheeraynta ugu yar | 0.0762mm |
| 6 | Daloollada ugu yar ee farsamada | 0.15mm |
| 7 | Dhumucdiisuna waxay tahay derbi dalool | 0.015mm |
| 8 | Dulqaadka daloolka birta ah | ±0.05mm |
| 9 | Dulqaad aan bir lahayn | ± 0.025mm |
| 10 | Dulqaadashada | ±0.05mm |
| 11 | Dulqaadka cabbirka | ± 0.076mm |
| 12 | Buundada alxanka ugu yar | 0.08mm |
| 13 | Iska caabin dahaarka | 1E+12Ω (caadi) |
| 14 | Saamiga dhumucda saxanka | 1:10 |
| 15 | Naxdinta kulaylka | 288 ℃ (4 jeer 10 ilbiriqsi gudahood) |
| 16 | Qallooc iyo qaloocsanaan | ≤0.7% |
| 17 | Awood ka-hortagga korontada | 1.3KV/mm |
| 18 | Xoogga ka-hortagga | 1.4N/mm |
| 19 | Alxan iska caabiso adkaanta | ≥6H |
| 20 | Dib u dhaca ololka | 94V-0 |
| 21 | Xakamaynta caqabada | ± 5% |
Waxaan sameynaa HDI Circuit Board oo leh waayo-aragnimo 15 sano ah oo leh xirfadayada
4 lakab Flex-Rigid Boards
8 PCB-yada adag-Flex
8 lakab HDI PCBs
Qalabka Imtixaanka iyo Kormeerka
Tijaabada Microscope
Kormeerka AOI
Tijaabada 2D
Tijaabada Impedance
Tijaabada RoHS
Baadhitaanka Duulaya
Tijaabada Horizontal
Laacidda Teste
Adeegeena Guddiga Wareega ee HDI
.Bixi taageero farsamo ka hor iibka iyo iibinta ka dib;
.Caadiyan ilaa 40 lakab, 1-2maalmood si degdeg ah u rogi kara wax-soo-saar la isku halayn karo, Iibka Qaybaha, Golaha SMT;
.U adeegta labada Aaladaha Caafimaadka, Xakamaynta Warshadaha, Baabuurta, Duulista, Elektarooniga Macmiilka, IOT, UAV, Isgaadhsiinta iwm.
.Kooxahayada injineerada iyo cilmi-baarayaasha waxay u heellan yihiin inay buuxiyaan shuruudahaaga si sax ah oo xirfad leh.
Sidee loo doortaa soo saaraha PCB ee fr4 dhinac kaliya leh?
1. Tayada iyo isku halaynta:
- Raadi soo saaraha sumcad adag ku leh soo saarista PCB-yada tayada sare leh.Arag dib u eegista macaamiisha, markhaatiyaasha, iyo tixraacyada (meesha la heli karo).
Hubi in soosaarayaashu raacaan heerarka warshadaha iyo shahaadooyinka (tusaale ISO 9001) si loo hubiyo in nidaamka xakamaynta tayada joogtada ah.
- Tixgeli rikoorkooda ah bixinta badeecado lagu kalsoonaan karo waqtigii loogu talagalay iyo la kulanka qeexida macaamiisha.
2. Awoodda wax-soo-saarka iyo farsamada:
- Qiimee awoodooda wax soo saar, oo ay ku jiraan qalabkooda, qalabkooda iyo khibradooda farsamo.
- Hubi inay leeyihiin awoodaha lagama maarmaanka u ah inay wax ka qabtaan shuruudaha PCB ee gaarka ah sida cabbirka, dhumucda iyo qeexida alaabta.
- Weydii kartida ay u leeyihiin inay wax ka qabtaan xulashooyinka dhammaystirka kala duwan iyo midabada maaskarada alxanka.
3. Taageerada naqshadeynta iyo adeegga:
- Qiimee in soo-saaruhu uu ku bixiyo taageerada naqshadaynta ama adeegyada injineernimada si ay kaaga caawiyaan tayaynta naqshadaynta PCB-gaaga.
- Hubi kartidooda ay ku bixiyaan dib u eegista naqshadaynta ama ay bixiyaan naqshadaynta falanqaynta wax-soo-saarka (DFM) ee ogaanshaha hore ee arrimaha suurtagalka ah.
- Tixgeli awoodda ay u leeyihiin in ay wax ka beddelaan naqshadeynta ama dib-u-eegista inta lagu jiro habka wax soo saarka.
4. Sicirka iyo Xigasho:
- Codso xigashooyin ka soo saarayaal badan oo is barbar dhig qiimahooda.
- Ka digtoonow qiimo jaban sababtoo ah tani waxay muujin kartaa arrimo tayo leh ama awoodda wax soo saarka oo aan ku filnayn.
- Raadi hufnaan xagga qiimaha, oo ay ku jiraan kharash kasta oo dheeraad ah oo ku saabsan qalabaynta, dejinta, ama soosaarka la dedejiyey.
5. Wakhtiga hogaanka wax soo saarka:
- Go'aami wax soo saarka caadiga ah iyo wakhtiyada keenista keenista ee soosaarayaasha.
- Ogow awoodooda wax-soo-saarkooda iyo inay buuxin karaan jadwalka wax-soo-saarka aad rabto ama wax kasta oo degdeg ah oo suurtagal ah.
6. Taageerada Macmiilka iyo Isgaadhsiinta:
- Qiimee jawaabta soo saaraha iyo kartida uu wax kaga qabanayo weydiimahaaga, walaacyadaada ama arrimahaaga wakhtiga ku haboon.
- Tixgeli helitaankooda iyo rabitaanka inay bixiyaan taageero iyo macluumaad inta lagu jiro habka wax soo saarka.
- Raadi kanaalada isgaadhsiinta ee waxtarka leh sida iimaylka, taleefanka ama wada sheekaysiga tooska ah.
7. Adeegyada dheeraadka ah:
- Go'aanso haddii soo-saaruhu uu bixiyo adeegyo dheeraad ah sida isku-ururinta PCB, tijaabinta, ama ka-soo-saarka qaybaha (haddii loo baahdo).
- Qiimee helitaanka adeegyada qiimaha lagu daray sida xaqiijinta naqshadaynta, tijaabinta shaqaynta ama baakadaha alaabta.
